Project PDA

EDGE/EGPRS is implemented as a bolt-on enhancement to 2G and 2.5G GSM and GPRS networks, making it easier for existing GSM carriers to upgrade to it. EDGE/EGPRS is a superset to GPRS and can function on any network with GPRS deployed on it, provided the carrier implements the necessary upgrades.

Packet-switched data under GPRS is achieved by allocating unused cell bandwidth to transmit data. As dedicated voice (or data) channels are setup by phones, the bandwidth available for packet switched data shrinks. A consequence of this is that packet switched data has a poor bit rate in busy cells. The theoretical limit for packet switched data is 171.2 kbit/s (using 8 time slots and CS-4 coding). A realistic bit rate is 30–80 kbit/s, because it is possible to use max 4 time slots for downlink.

A change to the radio part of GPRS called EDGE (sometimes called EGPRS or Enhanced GPRS however it actually stands for Enhanced Data rates for GSM Evolution) allows higher bit rates of between 160 and 236.8 kbit/s. The maximum data rates are achieved only by allocation of more than one time slot in the TDMA frame. Also, the higher the data rate, the lower the error correction capability. Generally, the connection speed drops logarithmically with distance from the base station. This is not an issue in heavily populated areas with high cell density, but may become an issue in sparsely populated/rural areas.

Although EDGE requires no hardware changes to be made in GSM core networks, base stations must be modified. EDGE compatible transceiver units must be installed and the base station subsystem (BSS) needs to be upgraded to support EDGE. New mobile terminal hardware and software is also required to decode/encode the new modulation and coding schemes and carry the higher user data rates to implement new services.

Transmission techniques

In addition to Gaussian minimum shift keying (GMSK), EDGE uses 8 phase shift keying (8PSK) for the upper five of its nine modulation and coding schemes. EDGE produces a 3-bit word for every change in carrier phase. This effectively triples the gross data rate offered by GSM. EDGE, like GPRS, uses a rate adaptation algorithm that adapts the modulation and coding scheme (MCS) according to the quality of the radio channel, and thus the bit rate and robustness of data transmission. It introduces a new technology not found in GPRS, Incremental Redundancy, which, instead of retransmitting disturbed packets, sends more redundancy information to be combined in the receiver. This increases the probability of correct decoding.

EDGE can carry data speeds up to 236.8 kbit/s for 4 timeslots (theoretical maximum is 473.6 kbit/s for 8 timeslots) in packet mode and will therefore meet the International Telecommunications Union's requirement for a 3G network, and has been accepted by the ITU as part of the IMT-2000 family of 3G standards. It also enhances the circuit data mode called HSCSD, increasing the data rate of this service.